Roland CUBE-80X Manuale Utente

Español

Italiano

Français

Deutsch

English

Português

Nederlands

Panel Descriptions

Important Notes When Using a Latch-type Footswitch Pedal

Normally, the on/off state of the footswitch pedal takes precedence over the control panel for switching EFX, delay, or reverb on

and off.

However, the on or off states stored in memory using the SOLO function take precedence when saved SOLO-function panel

settings are called up. Such cases may result in conflicting indicator displays on the control panel and the footswitch pedal, but this

is not a malfunction.

To make the indicator displays match up

Depress the footswitch pedal whose indicator display is different.

Make it match the indicator display on the control panel.

To make the on/off state of the footswitch pedal take priority at all times

On this unit, you can use either of the following settings to control operation when the panel settings for EFX, delay, and

reverb are called up using the SOLO function.

•

Make the on/off state of the footswitch pedal always take priority

•

Make the on/off state saved using the SOLO function take priority (default)

1. How to make the on/off state of the footswitch pedal always take priority

Hold down the TAP and SELECT switches at the same time and switch on the power.

2. How to make the on/off state saved using the SOLO function take priority

Hold down the TAP and TUNER switches at the same time and switch on the power.

The changed setting remains in memory after the power is switched off.

cube-80x.book 13 ページ２００８年１２月１２日　金曜日　午後６時７分