Stanton DJLab.3 Manuale Utente
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources. Next,
connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio
receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT:
Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers.
When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio
receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT:
Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers.
When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
TURNTABLE
TURNTABLE
SOUND SYSTEM
CD PLAYER
POWER
SUPPLY
CD PLAYER CONTROLLER