Pioneer DJM-2000nexus Manuale Utente
12
En
r
ON/OFF button (page 18)
s
LIVE SAMPLER (UTILITY, WAKE UP) buttons (page 17,
page 27)
t
SYNC MASTER/MIDI button (page 19)
u
MIX button (page 15)
v
REMIX button (page 16)
w
ON/OFF button (TOUCH PANEL EFFECT) (page 15)
x
Crossfader (page 12)
y
MASTER control (page 12)
z
Master Level Indicator (page 12)
A
BALANCE control (page 14)
B
MONO, STEREO selector switch (page 14)
C
BOOTH MONITOR control (page 14)
D
START/STOP (SNAPSHOT) button (page 19)
E
ON/OFF (MIDI) button (page 19)
F
CH EQ (ISOLATOR, EQ) selector switch (page 12)
G
CH FADER ( , ) selector switch (page 13)
H
CROSS FADER ( , , ) selector switch (page 13)
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
Basic Operation
Outputting sound
1 Press [POWER] button.
Turn on the power of this unit.
2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*]
switch
switch
Selects the input sources for the different channels from among the
devices connected to this unit.
devices connected to this unit.
— [CD/DIGITAL]: Selects the DJ player connected to the [CD] termi-
nals. To select the DJ player connected to the [DIGITAL IN] termi-
nal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL].
nal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL].
— [PHONO]: Selects the analog player connected to the [PHONO]
terminals.
— [LINE]: Selects the cassette deck or CD player connected to the
[LINE] terminals.
— [USB */*]: Selects the sound of the computer connected to the
[USB] port.
3 Turn the [TRIM] control.
Adjusts the level of audio signals input in each channel.
The corresponding channel level indicator lights when audio signals are
being properly input to that channel.
The corresponding channel level indicator lights when audio signals are
being properly input to that channel.
4 Move the channel fader away from you.
Adjusts the level of audio signals output in each channel.
5 Switch the [CROSS FADER ASSIGN (A, THRU, B)]
switch.
switch.
Switches the output destination of each channel.
— [A]: Assigns to [A] (left) of the crossfader.
— [B]: Assigns to [B] (right) of the crossfader.
— [THRU]: Selects this when you do not want to use the crossfader.
— [B]: Assigns to [B] (right) of the crossfader.
— [THRU]: Selects this when you do not want to use the crossfader.
(The signals do not pass through the crossfader.)
6 Set the crossfader.
This operation is not necessary when the [CROSS FADER ASSIGN (A,
THRU, B)] selector switch is set to [THRU].
THRU, B)] selector switch is set to [THRU].
7 Turn the [MASTER] control.
Audio signals are output from the [MASTER1] and [MASTER2]
terminals.
The master level indicator lights.
terminals.
The master level indicator lights.
Adjusting the sound quality
Turn the [EQ/ISO (HI, MID, LOW)] controls for the
respective channels.
respective channels.
Refer to Specifications on page 31 for the range of sound that can be
adjusted by each control.
adjusted by each control.
Switching the function of the [EQ/ISO (HI, MID,
LOW)] controls
Switch the [CH EQ (ISOLATOR, EQ)] selector switch.
— [ISOLATOR]: The isolator function is set. The indicator lights.
— [EQ]: The equalizer function is set.
— [EQ]: The equalizer function is set.
Monitoring sound with headphones
1 Connect headphones to the [PHONES] terminal.
2 Press the [CUE] button(s) for the channel(s) you want
to monitor.
to monitor.