Manualsbrain.com
  1. Manuali
  2. Marche
  3. Stanton
  4. VRM-10
  5. Manuale Utente

Stanton VRM-10 Manuale Utente

Scarica
Pagina di 8
MICROPHONE CHANNEL
3
DJ MIC 2
4
DJ MIC 1
Both mic inputs can be used as symmetrical or non-  sym-
metrical (balanced or non-balanced) channels with either
XLR or 1/4” jacks, with the provided combo connectors
THE XLR jack are set as follows: 
1
GND
2
+SIGNAL
3
-SIGNAL
THE 1/4” Jacks are set as follows:
TIP           
+SIGNAL
RING        
-SIGNAL
SHAFT      
GND
5
GAIN 2
6
CLIP LED for MIC 2
7
GAIN 1
8
CLIP LED for MIC 1
With the GAIN controls for both MIC channels you can set
the level for the preamplification of the microphones.
9
TREBLE
10
MIDDLE
11
BASS
The 3 band EQ adjusts the equalization level for both
microphone inputs.
12
VOLUME
The volume control adjusts the equalization level for both
microphone inputs.
The Microphone channel is routed directly to the MASTER
section in the output (please also see block diagram).
This means:
- The microphone channel will not be influenced by the 
external effect send
- The microphone channel can not be heard through 
headphones
- The microphone channel will not be shown through the
indicator tubes in the master section
NOTE : The signal and clip led’s will be affected by the
microphone channel.
3
INTERNAL DSP EFFECTS
13
EFFECT SELECT
With this control you can select one of the 16 selectable effect presets:
POSITION          
TYPE
CHARACTER
TIME
H1
Hall Reverb
Concert
2,4 sec
H2                         
Hall Reverb
Arena 
3,6 sec
R1                         
Room 
Club 
1,8 sec
R2                         
Room 
Chamber
1,0 sec
R3                         
Room
Garage
0,8 sec
P1                         
Plate                                 
Plate
2,0 sec
P2                         
Plate                                 
Vocal
1,5 sec
SP                        
Spring
3,4 sec
F1                         
Chorus/ Flange
7m sec
F2                         
Chorus/ Flange
12m sec
F3                         
Chorus/ Flange
25m sec
F4                         
Chorus/ Flange
35m sec
D1                        
Stereo Delay
200m sec
D2                         
Stereo Delay
300m sec
D3                         
Stereo Delay
400m sec
D4                         
Stereo Delay
500m sec
14
EFFECT LEVEL
This controls the volume of the effect signal
15
FEEDBACK
With this control you can set the feedback of your selected
e ffect.  This  function  only  works  with  the  CHORUS/
FLANGE and STEREO DELAY effects.
16
SPEED
With this control you can adjust the frequency of the LFO
(0.1-20 Hz). The LFO will affect all effects, depending on the
setting of the DEPTH control.
17
FACTOR
With this control you can adjust the Time factor of each