American Dj S-100A Dépliant

American DJ® 

Lamp:    ZB-45 
Power: 110V/60Hz 
Working Position: Any
Weight:  7 lbs.
Size: 9” x 9 “ x 9”

Thank  you  for  purchasing  this

American  DJ®  product.  For  your 

convenience  this  strobe  light    has

been lamped and is ready to be used,

t h e re  is  no  assembly  re q u i re d .

Please 

read 

the 

following 

i n s t ructions  before  installing  or

using your new unit.

Operating Instructions:

Unit is ready to be hung or set on the ground.
After plugging in unit, the light can be controlled by
the strobe flash adjustment pot on the rear of the
strobe.  The S-100A™ is a 45W strobe, including
mounting bracket and control signal input and 
output for linking up to four S-100A’s.  For use with
the S-10A™, S-4A™, or the S-2A™ remote 
controls. To link strobes use a 1/4” to 1/4” mono
cable.

Unplug unit.  Unscrew front two

screws and remove front plastic.  Take out lamp,
replace with a new lamp, then reassemble.  Do not
take the metal housing apart, strobes retain HIGH
VOLTAGE inside.  There are no serviceable parts
inside.

For service contact you local 

American  DJ ®

Dealer.

Always disconnect from main

power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.

American DJ

®