American Dj S-10S Dépliant
Operating Instructions:
1. Be sure the input power matches
that of your unit and plug your unit
in.
in.
2. Turn the power switch to on
position.
3. Select your desire control mode
(Flash/Stand-By/Audio)
Flash Mode will allow you to manually adjust
the rate of the flash by turning the rate knob
in either a clockwise or counter-clockwise
position (Clockwise will increase the flash
rate and counterclockwise will decrease the
flash rate.
the rate of the flash by turning the rate knob
in either a clockwise or counter-clockwise
position (Clockwise will increase the flash
rate and counterclockwise will decrease the
flash rate.
Stand-By mode is basically a black out mode
in this setting the strobe will not flash at all.
in this setting the strobe will not flash at all.
Audio mode will flash the strobe according to
beat detected by the controllers built-in
microphone.
beat detected by the controllers built-in
microphone.
©
American DJ Supply
®
-
Los Angeles, Ca. 90058 - www.americandj.com - S-10S™
Model:
S-10S™
SPECIFICATIONS:
Power: 110V-130V/60Hz
Weight: 2 lbs.
Size: 6” x 2.5” x 2”
Weight: 2 lbs.
Size: 6” x 2.5” x 2”
Sound Active
T h a n k y o u f o r p u rc h a s i n g t h i s
American DJ
American DJ
®
product. For your con-
venience this strobe controller has
been tested and is ready to be used,
t h e re i s n o a s s e m b l y re q u i re d .
Please read and understand the fol-
l o w i n g i n s t r u c t i o n s c o m p l e t e l y
before attempting installation or
using your new unit.
been tested and is ready to be used,
t h e re i s n o a s s e m b l y re q u i re d .
Please read and understand the fol-
l o w i n g i n s t r u c t i o n s c o m p l e t e l y
before attempting installation or
using your new unit.
Caution! This apparatus must be
grounded. To prevent fire or electri-
cal shock, do not expose this appara-
t u s u n d e r a h i g h t e m p e r a t u re o r
humid area. There are no user ser-
viceable parts inside please do not
a t t e m p t a n y t y p e o f s e r v i c e o r
repairs.
grounded. To prevent fire or electri-
cal shock, do not expose this appara-
t u s u n d e r a h i g h t e m p e r a t u re o r
humid area. There are no user ser-
viceable parts inside please do not
a t t e m p t a n y t y p e o f s e r v i c e o r
repairs.
For all service issues please refer to
your authorized local American DJ
dealer
your authorized local American DJ
dealer
Introduction:
The S-10S™ is a single channel strobe
controller. It features three operating condi-
tions; Stand By (black out), Flash button,
(manual), and Audio (sound active). This con-
troller also features a Variable Speed Control
Knob. The S-10S™ will control up to 6
American DJ
controller. It features three operating condi-
tions; Stand By (black out), Flash button,
(manual), and Audio (sound active). This con-
troller also features a Variable Speed Control
Knob. The S-10S™ will control up to 6
American DJ
®
Super Strobe™, S150™, S-
100A™, and SNAPSHOT™strobes with 1/4”
mono cable.
mono cable.
American DJ
®
User Instructions
S-10S™
Single Channel Strobe Controller