Manualsbrain.com
  1. Manuali
  2. Marche
  3. American Dj
  4. DJ Scan/RG
  5. Manuale Utente

American Dj DJ Scan/RG Manuale Utente

Scarica
Pagina di 8
Listed
 below
 are
 a
 few
 common
 problems
 the
 user
 may
 encounter
, 
with solutions.
No light from the unit;
1.
 
Check if the ‘Power On’ 
(red) LED is lit and the fan is running. If 
     
not, there is no main power supply.  
2.
 
Check the fuse in the back panel. 
3.
 
Check
 if
 lamp
 is
 lit.
 The
 user
 should
 be
 able
 to
 see
 some
 light
 
   
  
escape through the fan. If power is present but the lamp is not lit, 
     
lamp may need to be replaced. 
 
Note:
 The
 unit
 has
 been
 designed
 to
 shut
 the
 lamp
 down
 after
 
60 seconds of inactivity. This is a way of extending lamp life, be 
assured this is not a problem with the fixture.
Unit not responding to DMX;
1.
 
If
 the
 Green
 LED
 on
 the
 top
 of
 the
 unit
 is
 flashing,
 the
 unit
 is
 
     
definitely receiving DMX  
 
2.
 
Check the dip switch settings. 
3.
 
If the DMX LED is not lit, check that the DMX cables are connected 
   
  
properly
 and
 are
 wired
 correctly
 (pin
 3
 is
 ‘hot’;
 on
 some
 other
 
   
  
DMX devices pin 2 may be ‘hot’). 
Also, check that all cables are 
   
  
connected
 to
 the
 right
 connectors;
 it
 does
 matter
 which
 way
 the
 
     
inputs and outputs are connected.
4.
 
If it is a bad connection, the Green LED may flash when cables are 
     
wiggled (but remember it may also be the unit sensing audio!)
5.
 
If
 DMX
 connectors
 are
 fairly
 short,
 ordinary
 microphone
 cables
 
   
  
may be used. For longer runs, this may cause data transmission 
   
  
problems (which will show up as random or incorrect movements) 
     
for best result, use proper balanced data transmission cable.
Unit does not respond to sound;
1.
 
Check to see if the unit is receiving DMX (the green LED should 
     
be of
f).  
2.
 
T
apping the microphone should cause the LED to flash (quiet or 
   
  
high
 pitched
 sounds
 will
 not
 activate
 the
 unit).
 If
 the
 red
 LED
 
     
does not flash to sound there may be an internal problem.
3.
 
Be
 sure
 the
 audio
 sensitivity
 knob
 is
 turn
 in
 the
 full
 clockwise
 
     
position (maximum sensitivity). 
Unit blacks out in stand alone mode;
1.
 
Some
 of
 the
 units’
 built-in
 patterns
 include
 special
 ef
fects
 such
 
     
as blackout sweeps. 
2.
 
Be
 sure
 the
 audio
 sensitivity
 knob
 is
 turn
 in
 the
 full
 clockwise
 
     
position (maximum sensitivity). 
If problems are not resolved;
 Contact your 
American DJ
®
 customer 
support for possible service options.
©
American DJ Supply
®
  -  www
.americandj.com  - DJ Scan/RG™ Instruction Manual Page 12
©
American DJ Supply
®
  -  www
.americandj.com  - DJ Scan/RG™ Instruction Manual Page 1
1
  DJ Scan/RG™  
 
 
 
  T
r
ouble Shooting
  DJ Scan/RG™  
 
 
  T
r
ouble Shooting Cont.
The DJ Scan/RG
™
 carries a one year (365 days) limited warranty. We 
recommend
 you
 fill
 out
 the
 enclosed
 warranty
 card
 to
 validate
 your
 
purchase. All returned service items 
whether under warranty or not, 
must be freight pre-paid and accompany a return authorization (R.A.) 
number. If the unit is under warranty, you must provide a copy of your 
proof
 of
 purchase
 invoice.
 Please
 contact
 American
 DJ
®
 customer
 
support for a R.A. number.
  DJ Scan/RG™  
 
 
    Pr
oduct Registration
  DJ Scan/RG™  
 
 
  Master/Slave Settings
The following details the proper dip switch 
setting for Master-Slave operation. Please 
follow these setting when running four units 
in a Master-Slave confi
 guration.