Roland TD-9 Manuale Utente

Pagina di 80
 
19
 
Getting ready to play
 
BEFORE using the PD-105/85 mesh pads you must adjust the 
tension.
 
Use a drum key to make adjustments.
You can tension mesh heads the same way you do with 
acoustic drums.
 
Adjusting the tension of the PD-105/85 head is only for 
playing response and will not affect the pitch as on an 
acoustic drum.
 
Adjusting the PD-105 head
 
1. Loosen all six tuning bolts until a gap appears 
between the tuning bolt and the hoop.
2. Finger-tighten all six tuning bolts.
3. Using the drum key, tighten each of the six tuning 
bolts by two rotations.
 
Tighten the tuning bolts in the numerical order shown by 
the following illustration.
 
Tensioning the PD-85 head
 
1. Use the included drum key to tighten the tuning 
bolts.
 
Adjust the bolts so that the gap between the frame and 
hoop is consistent all the way around the hoop.
As the bolts have lock bushings (to prevent them from 
loosening), it will take some effort to turn them.
 
Tighten the tuning bolts in the numerical order shown in the 
following illustration. If you firmly tighten a tuning bolt at 
one location all at once, it will be impossible to stretch the 
head evenly, and this may cause triggering response 
problems.
 
2. Tension the head evenly as you test the playing feel, 
just as you would with an acoustic drum.
 
Tensioning the pads
 
Tensioning the head of a mesh pad
Tuning bolt
Hoop
Washer
Slight gap
1
3
4
2
5
6
HEAD MADE BY REMO U.S.A.
Hoop
Frame
Keep the space
even all around.
1
2
3
4
5
TD-9_e.book 19 ページ 2008年1月23日 水曜日 午後4時24分