Roland TD-9 Manuale Utente

 

If an error message appears in the TD-9’s screen, the TD-9 has failed to operate correctly for some reason, or an incorrect operation 
has been performed. Please take the appropriate action described here.

 

A MIDI cable was disconnected. (Or communi-
cation with the external MIDI device stopped 
for some reason.)

Make sure that MIDI cables have not been 
pulled out or broken.

 

A problem has occurred with the internal sys-
tem.

Contact your dealer or a nearby Roland ser-
vice center.

 

A large amount of MIDI messages were re-
ceived in a short time, and could not be pro-
cessed completely.

Confirm that the external MIDI device is prop-
erly connected. If the problem persists, reduce 
the amount of MIDI messages sent to the TD-9.

 

The TD-9 was attempting to transmit more data 
than could be correctly output from MIDI OUT.

Reduce the amount of data that is being trans-
mitted.

 

USB memory key is not connected.

Connect your USB memory key to the USB 
memory connector.

 

The specified data does not exist in USB memory key.

 

The USB memory key does not have sufficient 
free space.

Delete unneeded data.

 

The saved data is damaged.

 

The speed of access to USB memory key has 
slowed down because the number of files has 
increased.

Decrease the number of files.

 

The USB memory key is not operating correctly.

Check the USB memory key.

 

Either a USB device not usable by the TD-9 is 
connected, or foreign matter has entered the 
USB memory connector, causing a short.

Immediately disconnect the device, and check 
that no foreign matter has entered the USB 
memory connector.

 

No more memory capacity for Quick Rec.

Save your recording data on the USB memory 
key, and then start further recording.

 

A problem has occurred with the internal sys-
tem.

Contact your dealer or a nearby Roland ser-
vice center.

TD-9_e.book 64 ページ ２００８年１月２３日　水曜日　午後４時２４分