3M SE Manuale Utente

26 Basic setups

Measurement type (SLM, 1/1, 1/3, STI-PA, RT60)

Models SE and DL

 NOTE: To move to between the time, day, day fields, press Enter repeatedly

until one of these fields are highlighted and then press Up/Down arrow to move
between the fields.

5. If you’re finished working in the Time-Date screen, press On/Off/Esc

once to return to the Setup screen and twice to return to the Start screen.

Measurement type (SLM, 1/1, 1/3, STI-PA, RT60)

The measurement type  is easily selectable at the start screen via a softkey
button. This is assessable at all times unless you are running a study.  To
change or set the measurement type, ensure the SoundPro is stopped as
indicated by the stop   icon.  Depending on the options you ordered with
your SoundPro it may or may not have all the measurement types indicated
above.  NOTE: For STI-PA and RT60, please see Chapter 6, “Additional
Options”.



Setting Measurement type

1. Turn on the SoundPro SE/DL by pressing On/Off/Esc .

•

If turned on and you are not at the start screen, press On/Off/Esc
repeatedly until the start screen appears (see Figure 3-3).

2. At the start screen, select the first softkey button repeatedly until the

appropriate measurement type is selected.

•

You may have the following selectable options: Sound level meter (SLM), 1/1
octave, 1/3 octave, and/or STI-PA (Speech Transmission Index).

Figure 3-3: Measurement type and start screen

softkey

Repeatedly press to
move (toggle) through
measurement types

Softkey menu
Measurement type
(Sound Level Meter)