Omega CNI16D Manuale Utente

53

Preformatted data can be sent automatically or upon request from the controller.
Use the Data Format Submenus to determine what data will be sent in this
preformatted data string. Refer to the iSeries Communications Manual for more
information about the data format. At least one of the following suboptions must
be enabled and hence output data to the Serial Bus.

This menu is applicable for Continuous Mode of RS-232 communication.

Press  

d

37) Display advances to 

STAT Alarm Status Submenu.

Includes Alarm Status bytes in the data string.

Press  

d

38) Display flashes previous selection for “Status” (alarm status).

Press  

b

39) Scroll through the available selections: NO, YES.

Press  

d

40) Display shows 

STRD stored message momentarily and then

advances to 

RDNG only, if it was changed, otherwise press a to

advance to 

RDNG Reading Submenu.

Includes Main Reading in the data string.

Press  

d

41) Display flashes previous selection for “Reading”.

Press  

b

42) Scroll through the available selections: NO, YES.

Press  

d

43) Display shows 

STRD stored message momentarily and then

advances to 

PEAK only, if it was changed, otherwise press a to

advance to 

PEAK Peak Submenu.

Includes Peak Value in the data string.

Press  

d

44) Display flashes previous selection for 

PEAK Submenu.

Press  

b

45) Scroll through the available selections: NO, YES.

Press  

d

46) Display shows 

STRD stored message momentarily and then

advances to 

VALY only, it  was changed, otherwise press a to

advance to 

VALY Valley Submenu.

Includes Valley Value in the data string.

Press  

d

47) Display flashes previous selection for “Valley”.

Press  

b

48) Scroll through the available selections: NO, YES.

Press  

d

49) Display shows 

STRD stored message momentarily and then

advances to 

UNIT only, if it was changed, otherwise press a to

advance to 

UNIT Temperature Unit Submenu.