RedMax AG4300 Manuale Utente

16 

■ Before Long-term Storage 
• Drain fuel tank and run engine out until all

fuel in the carburetor is used up. 

• Remove the spark plug and drop a

spoonful 2 cycle oil into the cylinder.
Crank the engine several times and
replace the plug. 
Pull starter until compression is felt. 

• Brush off dirt from the drill surface and

apply rust protective oil. 

• Store the machine in a dry, dust-free

place. 

Model Name  ...................................................................................................................AG4300 
Engine 

Displacement  cu.in(cc) ........................................................................................2.53 (41.5) 
Maximum power  kW(HP) ....................................................................1.5 (2.0) at 7000 rpm 
Carburetor  ...........................................................................Diaphragm type (Walbro WYK) 
ignition system  ...............................................................................................Electric (T.C.I) 
Spark plug  .....................................................................................................NGK BPMR7A 
Starter   .............................................................................................................Recoil starter 
Fuel   .............................................................................2 cycle oil premixed gasoline (50:1 ) 

(when using ZENOAH genuine oil)

Fuel tank capacity  fl.oz(lit) .............................................................................................32 (0.94) 
Transmission  .................................................................Centrifugal clutch, worm gear reduction 
Gear box lubricant   .......................................................................................Gear oil SAE#80-90 
Reduction ratio   .....................................................................................................................45:1 
Grip span  in (mm)  .......................................................................................................21.2 (540) 
Over all dimensions 

Length  in (mm) .....................................................................................................24.8 (630) 
Width  in (mm) .......................................................................................................14.4 (359) 
Height w/o drill  in (mm)  ........................................................................................11.7 (292) 

Dry weight w/o drill  Ids (kg)  ..........................................................................................19.3 (8.9) 
Adaptable drill size 

Diameter  in (mm)  ...................................................................................0.8 to 8 (20 to 200) 

Specifications are subject to change without notice.