Murphy BCEG-24-20 Manuale Utente

 

7 - 

Before operating the battery charger, ensure that the charger is assembled and installed as 
per the installation instructions. 

WARNING:  DANGER OF INJURY OR DEATH 
Before connection, disconnection or handling of Guardian battery 
charger, be sure AC power supplies are off.   

NOTE:  Connection to or disconnection from live wiring can also cause damage 
to internal components. 

 

Output: To 

battery 

CAUTION:  Observe correct polarity 

Input: AC 

supply 

CAUTION:  Observe correct voltage as stated on unit. 

Alarm Indication 

Over voltage, under voltage and charge fail 

Boost: 

Boost initiate – Linking these two connectors will force the charger into a 
single boost cycle of operation.  Once the charger has completed a single 
boost cycle the charger returns to its normal mode of operation. 

 

Stripped wire is introduced just before the clamping unit. 

 

The clamp spring is pressed down and wire is introduced into the 
clamping unit immediately. 

 

The clamp spring is released – the conductor is automatically clamped. 

NOTE:  All connections, including AC input and DC output are made via spring-
clamp connections as outlined above.