Makita DC18RC Manuale Utente

DISASSEMBLING

1. While compressing a couple of Compression spring 4 toward

    the retaining portions of Terminal cover, insert the boss of 

    Terminal cover into the elliptic hole of Charger case.

Terminal

cover

3x10 Tapping

screw

Charger case

Terminal cover

Compression

spring 4 (2 pcs.)

Remove 3x10 Tapping screw from the reverse side of

the removed Charger case complete, then separate 

a couple of Compression spring 4 from Terminal cover.

Note: These compression springs are different from 

          Compression spring 4 behind Terminal unit. 

Refer to Fig. 4.

ASSEMBLING

Retaining portion

Boss

P 3/ 5

Compression

spring 4

Elliptical hole

Boss of Terminal cover

Compression spring 4

Retaining portion of

Charger case to

receive Compression

spring 4

2. Push the compression springs using Slotted screwdriver 

    and fit them to the retaining portions of Charger case and 

    Terminal cover. 

3. Drive 3x10 Tapping screw to the boss of Terminal cover. (Fig. 3)
Note: The fastening torque has to be 0.5N.m. (5kgf.cm)

Terminal

cover

Retaining portion of

Charger case to

receive Compression

spring 4

Retaining portion of Terminal cover

to receive Compression spring 4