Tru-Test 3 J Manuale Utente

3

 

Installing the energizer inside 

The energizer must be installed inside when being 
powered by the mains/line power supply. 

Warning!   

-  Do not use a mains/line power extension lead. 
-  Allow 25 mm of clear space around the mains/line 

power adaptor. 

To install the energizer inside: 
1 

Select a suitable installation site. See 

Selecting a 

site for the installation

2 

Mount the energizer on a wall. Use the template 
printed on the back cover of this manual, if 
required. 

3 

Connect the Fence earth terminal (green) to the 
earthing system. 

4 

Connect the Fence output terminal (red) to the 
fence. 

5 

Connect the energizer to the mains/line power 
using the mains/line power adaptor. 

 

Note: 

 If the energizer is being installed inside, it may be 

powered by a battery instead of the mains/line power 
supply, if required. 

 

Installing the energizer outside 

The energizer may be installed outside, powered by a 
battery. 

Warning!

  Do not power the energizer with the 

mains/line power supply if it is being installed outside. 

To install the energizer outside: 
1 

Select a suitable installation site. See 

Selecting a 

site for the installation

2 

Hang the energizer on a fence wire or mount the 
energizer on a post. Use the template printed on 
the back cover of this manual, if required. 

3 

Connect the Fence earth terminal (green) to the 
earthing system. 

4 

Connect the Fence output terminal (red) to the 
fence. 

5 

Connect the energizer to the battery using the 
battery leads. Attach the + (red) clip to the positive 
terminal of the battery, and the – (black) clip to its 
negative terminal. 

 

Note:

 If required, this energizer can be used as part of a 

solar installation, by connecting it to a battery and solar 
panel(s). For information about solar installations, refer to 
the product's website (see packaging for details).