Grizzly G0601 Manuale Utente
-16-
Model g0442/g0601 (Mfg since 8/10)
G0601 440v Conversion
the Model g0601 can be converted for 440v
operation. this conversion job consists of dis-
connecting the machine from the power source,
replacing the control box assembly, and rewiring
the motor for 440v operation.
operation. this conversion job consists of dis-
connecting the machine from the power source,
replacing the control box assembly, and rewiring
the motor for 440v operation.
the necessary control box (part p0601003-1)
for this procedure can be purchased by calling
grizzly Customer service at (800) 523-4777.
for this procedure can be purchased by calling
grizzly Customer service at (800) 523-4777.
All wiring changes must be inspected by a quali-
fied electrician before the machine is connected
to the power source. if you need help at any time
during this procedure, call grizzly tech support at
(570) 546-9663.
fied electrician before the machine is connected
to the power source. if you need help at any time
during this procedure, call grizzly tech support at
(570) 546-9663.
To rewire the Model G0601 for 440v opera-
tion:
tion:
1. disConneCt MAChine FroM poWer!
2. record the wire colors and connections of
the four incoming power wires and the four
outgoing motor wires inside the 220v control
box, as illustrated in
outgoing motor wires inside the 220v control
box, as illustrated in
figure 5. you can also
refer to the
G0601 Wiring Diagram on Page
53 for a more complete wiring illustration.
1L1
3L2
5L3
NO13
2T1
4T2
6T3
NO14
98
97
96
95
GROUND
Overload Relay
Contactor
A1
POWER SOURCE
figure 5. incoming and outgoing wire
connections to the control box.
4 incoming
power Wires
4 outgoing
Motor Wires
3. disconnect these eight wires, then replace
the 220v control box with the 440v control
box.
box.
4. reconnect the wires as recorded in Step 2.
5. rewire the motor as shown inside the motor
junction cover.
Note: The reference wiring diagram on Page
53 was current at the time of printing, but
always use the wiring diagram provided
inside the motor junction box, as it will reflect
any changes to the motor shipped with the
machine.
always use the wiring diagram provided
inside the motor junction box, as it will reflect
any changes to the motor shipped with the
machine.