Emulex 3.4 Manuale Utente

8.

The two radio buttons allow you to choose the type of parameters to save. You can save all 
parameters or only those parameters whose current values differ from their corresponding 
default values.

A list of the saved parameters and their current values show in the Saved Parameters box. 

9.

Click Save.

10. Assign batch mode parameters to HBAs: From the Batch menu select Update Driver 

Parameters. (You do not need to select any discovery-tree elements at this time.) The Select 
Driver Parameter File dialog box appears. 

11. Select the file whose parameters you wish to apply and click Open. The Batch Driver Parameter 

Update dialog box shows all the batch file compatible HBAs with a check mark beside them. 

12. Click Start. The HBAnyware Batch Driver Update dialog box shows the current status of the 

update. When the update completes, a final summary shows the number of HBAs that were 
successfully processed, and the number of HBAs for which one or more parameter updates 
failed. 

13. If you wish, click Print Log to print a report of the update.

Note: Solaris LPFC, Solaris emlxs (SFS) and Linux: A Browse button is included on the 

Batch Driver Parameters Update dialog box. The Browse button allows you to 
navigate to a different file.

Note: Printing is not supported in Linux.