Emulex 3.4 Manuale Utente
![Emulex](https://files.manualsbrain.com/attachments/a9f06904df68a16969329cee0d321b3316fb4c39/common/fit/150/50/630eec64b37fa4951c28d41e544ee407b01af1301ac246d0d1b2a6860802/brand_logo.jpeg)
The HBAnyware Utility User Manual
Page 86
lpfc_discovery_threads
32
1
64
Specifies the maximum number of
ELS commands that can be
outstanding for a discovery.
ELS commands that can be
outstanding for a discovery.
Note: The discovery_threads
parameter will default to a value of
64 for private loop topologies
regardless of the configured value.
If there are multiple ports
configured on the host the value of
64 will only be used for those ports
that are connected in a private
loop topology. The configured
value will be used for all other
ports.
Note: On the VMware ESX Server
only, range is 30 - 64. The default
is erroneously set to 1. Set this
parameter to a valid value. If you
do not, when you change any
parameter value, the following
error message may be displayed:
“Driver Parameter ‘discovery-
threads’ is not within the allowed
range”
parameter will default to a value of
64 for private loop topologies
regardless of the configured value.
If there are multiple ports
configured on the host the value of
64 will only be used for those ports
that are connected in a private
loop topology. The configured
value will be used for all other
ports.
Note: On the VMware ESX Server
only, range is 30 - 64. The default
is erroneously set to 1. Set this
parameter to a valid value. If you
do not, when you change any
parameter value, the following
error message may be displayed:
“Driver Parameter ‘discovery-
threads’ is not within the allowed
range”
No
lpfc_fcp_class
3
2
3
FC class for FCP data
transmission.
transmission.
Yes
lpfc_link_speed
0
0=auto select
1=1G
2=2G
4=4G
8=8G
1=1G
2=2G
4=4G
8=8G
Sets link speed.
Yes
lpfc_hba_queue_depth*
8192
32
8192
Maximum number of FCP
commands that can queue to an
Emulex HBA.
commands that can queue to an
Emulex HBA.
Yes
lpfc_lun_queue_depth
30
1
128
Default max commands sent to a
single logical unit (disk).
single logical unit (disk).
Yes
lpfc_topology
0
0x0=loop
then P2P
0x2=P2P only
0x4=loop only
0x6=P2P
then loop
then P2P
0x2=P2P only
0x4=loop only
0x6=P2P
then loop
FC link topology (defaults to loop,
if it fails attempts point-to-point
mode).
if it fails attempts point-to-point
mode).
Yes
Table 6: Driver for Linux, LPFC Static Parameters (Requires a driver reload to change) (Continued)
Variable
Default
Min
Max
Comments
Visible
using
sysfs
using
sysfs