Emulex 3.4 Manuale Utente
The HBAnyware Utility User Manual
Page 94
lpfc_max_vpi
0xffff
0
0xffff
No
NPIV: Maximum number of vpis
available per physical port.
available per physical port.
lpfc_nodev_holdio
0
0=Off
1=On
Yes
If the device disappears, hold I/O
until it comes back.
until it comes back.
lpfc_no_device_delay
1
0
30
Yes
Delay to fail back an I/O in
seconds.
seconds.
lpfc_nodev_tmo
30
0
255
Yes
Seconds to hold I/O err if device
disappears.
disappears.
lpfc_ns_threads
2
1
32
Yes
NPIV: Number of concurrent
NameServer requests allowed to
be outstanding.
NameServer requests allowed to
be outstanding.
lpfc_peer_vport_login
0
0
1
Yes
NPIV: Allows peer Vports to log
into each other.
into each other.
lpfc_scan_down
1
0=Off
1=On
Yes
Select method for scanning ALPA
to assign a SCSI ID.
to assign a SCSI ID.
lpfc_scsi_req_tmo
30
0
255
Yes
Time out value (in seconds) for
SCSI passthrough requests.
SCSI passthrough requests.
lpfc_tgt_queue_depth
0
0
8192
Yes
Default max commands sent to a
single target.
single target.
lpfc_topology
0
0x0=loop
then P2P
0x2=P2P only
0x4=loop only
0x6=P2P
then loop
then P2P
0x2=P2P only
0x4=loop only
0x6=P2P
then loop
No
FC link topology (defaults to loop, if
it fails attempts point-to-point
mode).
it fails attempts point-to-point
mode).
Table 11: Driver for VMware ESX Configuration Parameters (Continued)
Variable
Default
Min
Max
Dynamic
Comments