Grizzly G0468 Manuale Utente

Model G0464/G0465/G0467/G0468/G0470 Air Compressors

Unpacking

SECTION 3: SET UP

Your air compressor left our warehouse in
a carefully packed crate or box. If you dis-
cover the air compressor is damaged after
you have signed for delivery, please imme-
diately call Customer Service at (570) 546-
9663 for advice.

Save the container and packing materials
for possible inspection by the carrier or its
agent. Otherwise, filing a freight claim can
be difficult.

Assembly

To assemble the air compressor:

1. Remove all packing materials and any

protective plastic bags, zip tie labels or
tags from the compressor.

2. Be sure the air filter is attached to the

cylinder head as shown in

Figure 2.

Figure 3. Proper oil level.

3. Add compressor oil, or ISO 100/SAE

30W non-detergent oil, to the crank-
case. Remove the oil breather (inset
in

Figure 3) on top of the crankcase

and add oil into the hole. The oil level
should be in the center of the sight
glass as shown in

Figure 3 (This step

does not apply to the Model G0468).

Figure 2. Air filter attached to

cylinder head.

NOTICE

This  machine  should  never  be  run
without  a  full  oil  reservoir.  The  oil
provides lubrication to the cylinder
rings, which deliver the compressed
air.  Severe  damage  to  the  internal
moving  parts  can  occur  if  there  is
not adequate oil flow. Check the oil
level frequently, and change the oil
every 3 months.

Oil Breather