Yamaha 3-axis model Manuale Utente
10-12
Chapter 10 HXYX
3-2
Moving arm type 2-axis model
The moving arm type has an aluminum-cast bracket on the end of the Y-axis.
Install the tool on this bracket.
Twelve M8 coarse thread tap holes and two
Install the tool on this bracket.
Twelve M8 coarse thread tap holes and two
φ6 reamer holes are opened on the
bracket.
Fig. 10-11 HXYX moving arm type
!
CAUTION
If the fitting length is less than 16mm, the threads could be damaged during
tightening. If the fitting length is longer than 30mm, the screw could contact the
Y-axis.
tightening. If the fitting length is longer than 30mm, the screw could contact the
Y-axis.
Select the minimum fixing bolt screw length so that the screw fitting length is
16mm or more.
16mm or more.
4-M8
×1.25
120
(T
oler
ance betw
een knoc
k (0.02)
63
133
78
2-
φ6H7 Depth8
20
12.5
168