Roland EGX-20 Manuale Utente
41
6 Other Information
Replacement Cutters and Consumable Parts
The following replacement blades and consumable parts are available.
Replacement Cutters (Diameter 3.175 mm and Length 114 mm)
General-purpose (general-purpose cutters suitable for engraving acrylic and plastic plates)
No.
Blade width
• ZEC-A2013
0.127 mm
• ZEC-A2025
0.254 mm (* This is the originally included blade.)
• ZEC-A2051
0.508 mm
• ZEC-A2076
0.762 mm
Flat cutter (blades having a wider tip than general-purpose cutters)
No.
Blade width
• ZEC-A2150
1.52 mm
• ZEC-A2190
1.91 mm
• ZEC-A2230
2.29 mm
• ZEC-A2320
3.175 mm
Quarter-round types (having a larger tip pocket than general-purpose cutters, and suited to
engraving soft material at high speed)
No.
Blade width
• ZEC-A2013-QR
0.13 mm
• ZEC-A2025-QR
0.25 mm
Adhesive Sheet
No.
Specification
• AS-10
210 mm x 140 mm, 10 sheets
Replacement Spindle-motor Unit
As a general guide, we recommend replacing this after every 1,000 hours.
Daily Care and Maintenance
• Use a vacuum cleaner to carefully clean away cutting dust.
• Use a toothbrush or the like to remove cuttings from the adhesive sheet.
• Do not use an air blower or the like to blow away cutting dust. The cuttings may get inside the machine and cause breakdown.
• Use a dry or well wrung-out cloth to wipe clean. Do not use solvents such as thinner or alcohol.
• Lubrication is not required. Improper application of grease or the like may actually lead to breakdown and should not be attempted.
• Use a toothbrush or the like to remove cuttings from the adhesive sheet.
• Do not use an air blower or the like to blow away cutting dust. The cuttings may get inside the machine and cause breakdown.
• Use a dry or well wrung-out cloth to wipe clean. Do not use solvents such as thinner or alcohol.
• Lubrication is not required. Improper application of grease or the like may actually lead to breakdown and should not be attempted.
6 Other Information