Dynex DX-CR112 Manuale Utente

6-in-1 Memory Card Reader

Important safety instructions

Before getting started, read these instructions and save them for later reference.

• Before you plug your card reader into your computer, read this user guide. In some

operating systems, the driver must be installed before you install your card reader.

• Do not drop or hit your card reader.
• Do not install your card reader in a location that is subject to strong vibrations.
• Do not disassemble or try to modify your card reader. Disassembly or modification may

void your warranty and could damage your card reader leading to a fire or electric
shock.

• Do not store your card reader in a damp location. Do not allow moisture or liquids to

drip into your card reader. Liquids can damage your card reader leading to a fire or
electric shock.

• Do not insert metal objects, such as coins or paper clips, into your card reader.
• Do not remove a card when the LED indicator shows data activity is in progress. You

may damage the card or lose data stored on the card.

Card reader components

Package contents

• 6-in-1 Memory Card Reader
• Quick Setup Guide*

*Note: For further assistance, go to www.dynexproducts.com.

Minimum system requirements

• IBM-compatible PC or a Macintosh computer
• USB port
• Pentium 133 MHz or higher processor
• 2 MB of hard drive space
• Windows® XP, Windows® Vista, Windows® 7, or Mac OS 10.4.x or higher

Note: Some memory cards, such as the SDXC, are not compatible with Windows XP. Refer to

your card manufacturer to see if your card is compatible with your OS.

DX-CR112_12-0054_MAN_V2_EN.fm Page 3 Friday, May 18, 2012 1:40 PM