Garmin CX5800F Manuale Utente

Maintaining Your Epson Stylus CX5800F

6. Press the y

Cancel/Back

 button to return to the first screen.

If the pattern does not look good, try cleaning the print head as described on the 
next page. 

Note: 
You can also check the print head nozzles using software when the Epson Stylus 
CX5800F is connected to your computer. See the User’s Guide for instructions.

If your printouts are unexpectedly light or faint, or you notice light or dark bands 
across your printout, you may need to clean the print head. This unclogs the 
nozzles so they can deliver ink properly. Run a nozzle check as described on 
page 47 to see if the print head needs cleaning.

Note: 
Print head cleaning uses ink, so clean it only if quality declines and the nozzle check 
indicates that the print head needs to be cleaned.

If you see an ink error message on the display, you cannot clean the print head. In this 
case, press the OK button and replace the appropriate ink cartridge first. See page 50 
for details.

1. Press the P

On

 button to turn on the Epson Stylus 

CX5800F, or press the y

Cancel/Back

 button 

until you see a screen like this:

2. Press the 

Setup

 button. You see this display:

3. Press the u or d button, or press the 

4 

key on the 

numeric keypad, to display this option:

4. Press the 

OK

 button. The Epson Stylus CX5800F runs a head cleaning cycle 

and the message 

Cleaning . . .

 appears on the display.

Caution: 
Never turn off the Epson Stylus CX5800F while head cleaning is in progress. You 
may damage it.

5. When the display returns to 

4.Head Cleaning

, run a nozzle check to verify 

that the print head is clean. See page 47 for details.

6. If there are still gaps or lines, or the test patterns are faint, run another 

cleaning cycle and check the nozzles again.

12:00 PM       Y

1.Load/Eject

4.Head Cleaning