Garmin CX11NF Manuale Utente

Consumable Replacement Messages

When you see the following messages in the LCD screen or in the EPSON Status 
Monitor 3 window, you need to replace the indicated unit. You can continue printing 
for a short time after a message appears, but Epson recommends early replacement to 
maintain print quality and extend the life of your product. 

Note: 
To clear the message, press the 

Setup button on the control panel, select Reset 

from Printer settings, then select Clear All Warnings.

The CX11N stops printing if the worn consumable might damage the CX11N. You 
must replace the consumable product to continue.

If a consumable product reaches the end of its service life, the product stops printing 
and displays the following messages on the LCD screen or in the EPSON Status 
Monitor 3 window. 

1 The letters C, M, Y, and K appear in this position, indicating the color of the empty toner 

cartridge.

2  Even if this message is displayed in the LCD screen, you can continue to print for a short time by 

pressing the 

x

B&W Start or x Color Start button on the control panel. The message in the 

LCD screen changes from Replace Photocondctr to Worn Photoconductor.

Messages appear for one consumable product at a time. After replacing a part, check 
the LCD screen for replacement messages for other parts.

Worn Photoconductor The photoconductor is near the end of its service life. 

Replace the photoconductor with a new one.

Worn Fuser

The fuser has reached the end of its service life. 
Contact Epson as described on page 128.

Worn uuuu Dev Unit

The developer has reached the end of its service life. 
Contact Epson as described on page 128.

Replace Toner uuuu

1

The indicated toner cartridge is empty.

Replace Photocondctr

2

The photoconductor is at the end of its service life.