Garmin 725 Manuale Utente

Solving Problems

■

Epson Scan is not available in Mac OS X 10.6; see page 30 for scanning 
instructions.

■

If you cannot scan from the product’s control panel, make sure you restarted 
your computer after installing the product software. Make sure Epson Event 
Manager is not being blocked by your firewall or security software.

■

If you are scanning a large photo or document at high resolution, a 
communication error may occur. If the scan did not complete, lower the 
resolution.

■

If network communication was interrupted while starting Epson Scan, exit 
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart, 
turn the product off and on, and then try again. Check the 

Timeout Setting

 

in 

EPSON Scan Settings

. For details, see the Epson Scan Help.

1. Press  

Home

, until

Setup

 is selected, then press 

OK

.

2. Press u or d to select 

Network Settings

, then press 

OK

.

3. Press u or d to select 

Confirm Network Settings

, then press 

OK

.

4. Press x 

Start

 to print a network status sheet.

■

Make sure your paper is loaded printable side down (usually the whiter, 
brighter, or glossy side). Don’t load paper above the edge guides.

■

Make sure the type of paper you loaded matches the paper size and paper type 
settings on the control panel when copying or printing (see page 15), or in 
your printer software (see page 26).

■

You cannot print or copy when an ink cartridge is expended even if the other 
cartridges are not expended (but you can still scan and view photos on the 
display screen). Replace any expended cartridges before printing or copying.

■

For 2-sided printing with Macintosh, you may see a message that the auto 
duplexer is not installed. Open 

EPSON Printer Utility 4

 (in the Applications/

Epson Software folder), click the 

Printer and Option Information

 button, 

and click 

OK

. Then close and reopen the print window.