Konica Minolta A0HF012 Manuale Utente
Scanning With the Machine
6-8
Scanning With the Machine
The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
scanning from a computer application since the destination of the scan data
can also be specified.
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
is not lit up in green, press the Scan key to enter Scan mode.
"
If, while specifying settings, no key is pressed for the length of time
specified for
specified for
AUTO PANEL RESET
, the entered settings are can-
celed and the main screen (Scan mode) is displayed.
Basic Scanning Operation
1
Position the document to be
scanned.
scanned.
"
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 3-28 and “Loading
a document into the ADF”
on page 3-29.
the document, refer to
“Placing a document on
the original glass” on
page 3-28 and “Loading
a document into the ADF”
on page 3-29.
2
Press the Scan key to enter Scan mode.