Sharp AL-1556 Manuale Utente
SET UP THE SOFTWARE
51
5
11
The printer or printers
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
12
In the window for setting
the destination print port
name, make sure that
":lp" appears at the end of
the IP address and click
the "Next" button.
the destination print port
name, make sure that
":lp" appears at the end of
the IP address and click
the "Next" button.
13
A window appears to let
you check your entries.
Make sure that the entries
are correct and then click
the "Finish" button.
you check your entries.
Make sure that the entries
are correct and then click
the "Finish" button.
If any of the entries are
incorrect, click the "Back"
button to return to the
appropriate window and
correct the entry.
incorrect, click the "Back"
button to return to the
appropriate window and
correct the entry.
If the machine's IP address cannot be found, make sure the machine is
powered on, make sure the network cable is connected correctly, and
then click the "Search" button.
powered on, make sure the network cable is connected correctly, and
then click the "Search" button.
Any name can be entered in "Printer Port Name" (maximum of 38
characters).
characters).
Note
Note