Sharp AL-1644 Manuale Utente
67
ROUTINE MAINTENANCE
6
CLEANING THE TRANSFER CHARGER
If copies start becoming streaky or blotchy, the transfer charger may be dirty.
Clean the charger using the following procedure.
Clean the charger using the following procedure.
1
Turn the power switch off.
2
Open the bypass tray and the side
cover.
cover.
3
Lift and pull out the upper paper tray.
4
Take the charger cleaner out by
holding the tab.
holding the tab.
5
Set the charger cleaner onto the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
If the white sheet metal is
smudged with toner,
wipe it with a soft, clean
cloth.
smudged with toner,
wipe it with a soft, clean
cloth.
6
Return the charger cleaner to its
original position. Close the upper
paper tray. Close the side cover by
pressing the handle on the cover.
original position. Close the upper
paper tray. Close the side cover by
pressing the handle on the cover.
7
Turn the power switch on.
Slide the charger cleaner from one end to the
other end along the groove of the transfer
charger. If the cleaner is stopped on the way,
smudges on copies may occur.
other end along the groove of the transfer
charger. If the cleaner is stopped on the way,
smudges on copies may occur.
Charger
cleaner
cleaner
Note
AL-1633_1644_EX.book 67 ページ ２００３年１０月２３日 木曜日 午後８時２１分