Sharp AR-M201 Manuale Utente

Pagina di 96
TROUBLESHOOTING AND MAINTENANCE
62
Error 
indicator
Blinks
INSTALL A TONER 
CARTRIDGE.
The toner cartridge is not installed 
correctly. Reinstall the toner cartridge.
74
Steadily 
lit
TONER 
CARTRIDGE IS 
NEAR EMPTY.
Replacement of toner cartridge will be 
needed soon. Prepare a new cartridge.
74
MAINTENANCE 
REQUIRED CALL 
FOR SERVICE
Service by an authorised SHARP 
service technician is required.
-
MEMORY FULL, PRESS START TO 
RESUME.
Data is being held in memory. Print the 
data or clear it from memory.
30
NO 2-SIDED COPY FROM BYPASS 
TRAY.
Two sided printing or 2 IN 1 copying is 
selected when the bypass tray is 
already selected ,or the bypass tray is 
selected when two-sided printing or 2 
IN 1 copying is already selected.
The bypass tray cannot be used. Press 
the [TRAY SELECT] key (
) to select 
a paper tray.
26
31
NO 2IN1 COPY FROM
BYPASS TRAY.
NO 2IN1 COPY WITH MARGIN SHIFT.
2 IN 1 copy and margin shift cannot be 
used in combination. Cancel the 
function that was selected last.
31
34
COPY RATIO CAN NOT BE 
CHANGED IN 2IN1.
Copy ratio can not be changed in 2 IN 
1 copy.
25
31
THIS MENU IS NOT SELECTABLE 
WITH DATA.
This appears if you attempt to change 
a user program setting while a print job 
is in progress.
54
NO XXXX SIZE TRAY
There is no paper for printing. Press 
the [MODE SELECT] key to switch to 
printer mode and follow the instructions 
in the display.
("XXXX" indicates paper size)
-
CHECK SPF/RSPF.
START TO RESUME.
An original remains on the document 
glass, or the original is too thick to 
scan. Remove the original.
21
If the message is not cleared when 
there is no original on the document 
glass, the underside of the original 
cover/RSPF is dirty. Clean the 
underside of the original cover/RSPF. 
(especially areas where black lines 
appear.)
78
LOAD XXXX PAPER INTO TRAY<*>.
Printing is not possible if the paper size 
setting is different from the size of 
paper loaded in the tray. Load the 
same size of paper as the paper size 
setting and then press the [START] key 
(
). Printing will begin.
("XXXX" indicates paper size. The tray 
is indicated in <*>.)
15
NO PC COMMUNICATION; CHECK 
CABLE.
The machine is not correctly connected 
to the computer. Check the cable 
(when using the scanner function).
42
Indication
Cause and remedy
Page
Lamp indicator
Display
!AR-M201.book  62 ページ  2008年2月12日 火曜日 午後7時41分