Sharp AL2021 Manuale Utente
4
32
Making two-sided copies
1
Place the original(s) on the document glass or in the SPF. (see
"ORIGINAL PLACEMENT" (p.26).
"ORIGINAL PLACEMENT" (p.26).
2
Select two-sided copy mode.
When copying in a one-sided to two-sided mode:
Use the Two-sided copy key to select the desired one-sided to two-sided
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 31.
Use the Two-sided copy key to select the desired one-sided to two-sided
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 31.
3
Select the copy settings. See "SET THE COPY QUANTITY"
(p.28), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.28),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.30).
(p.28), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.28),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.30).
Using the document glass
1
Press the start (
) key.
The original is scanned into the unit's memory and the number of the
copy quantity blinks in the display.
copy quantity blinks in the display.
2
Place the original that you wish to copy onto the rear side of the
paper, and press the start (
paper, and press the start (
) key again.
Copying begins.
Using the SPF (AL-2041)
Press the start (
Press the start (
) key. Copying begins in the selected two-sided copy mode.