Samsung SCX3405FWXAC Manuale Utente
System setup
206
3. Useful Setting Menus
Job Timeout
Sets the length of time the printer waits before printing
the last page of a print job that does not end with a
command to print the page.
the last page of a print job that does not end with a
command to print the page.
Wakeup Event
You can set the condition to wake up from power-save
mode. Set the item on.
mode. Set the item on.
•
Button Press: When you press any button except
power button, the machine wake up from the power
save mode.
power button, the machine wake up from the power
save mode.
•
Scanner: When you insert paper in the document
feeder, the machine wake up from the power save
mode.
feeder, the machine wake up from the power save
mode.
•
Printer: When you open or close the paper tray, the
machine wake up from the power save mode.
machine wake up from the power save mode.
Auto Continue
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
printing when it detects the paper does not match the
paper settings.
•
Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
until you insert the correct paper.
•
On: If a paper mismatch occurs, an error message will
display. The machine waits for about 30 second, then
automatically clear the message and continue
printing.
display. The machine waits for about 30 second, then
automatically clear the message and continue
printing.
•
Altitude Adj.
•
Altitude
Adjustment
Adjustment
Optimize print quality according to the machine’s
altitude.
altitude.
Item
Description
Auto CR
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
each line feed, which is useful for Unix or DOS users.
Firmware Version
Shows the product’s firmware version.
AutoComplete
Provides suggestions while you type an email address or
fax number. This enables you to find and select the data
without typing it in completely.
fax number. This enables you to find and select the data
without typing it in completely.
•
Tray Chaining
•
Auto Tray Switch
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
This option does not appear if you selected Auto
for Paper Source from printer driver.
for Paper Source from printer driver.
Paper Substit.
Paper Substitution
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Paper Mismatch
Determine whether to disregard the paper mismatch
error or not. Select Off, then the machine does not stop
printing even if the paper mismatches.
error or not. Select Off, then the machine does not stop
printing even if the paper mismatches.
Item
Description