Sharp FO-DC500 Manuale Utente

Installing the Printer Driver

The SHARP PCL XL printer driver printer driver is provided in the CD-ROM in 
the FO-NP1 printer kit. This driver must be installed in every computer that 
uses the printer.

Important: The printer driver cannot be installed unless the FO-NP1 Printer 
Expansion Kit and FO-LN1 LAN interface have been installed in the machine 
and the machine is ready for use as a network printer.

♦

Before installing the printer driver, be sure to read the “Readme” file on the 
CD-ROM (Option\English\Readme.txt) for the latest information.

You will need the following hardware and software in order to install the printer 
driver.

In some cases it is necessary to enter the IP address of the machine when 
installing the printer driver. To check the IP address, follow the procedure in 

Printing out the Network Settings

 on page 78.

• IBM PC/AT or compatible computer equipped with an 

Ethernet interface

• Windows 98 Second Edition, Windows Me, Windows NT 

4.0 Workstation/Server (Service Pack 3 or later), 
Windows 2000 Professional/Server, XP Home/
Professional.

• Windows 98 / Windows NT 4.0 / Windows Me / Windows 

2000: Pentium, 200 MHz or higher

• Windows XP: Pentium, 300 MHz or higher

• Windows 98 / Windows NT 4.0 / Windows Me / Windows 

2000: 64 MB or higher

• Windows XP: 128 MB or higher