Sharp FO-DC500 Manuale Utente

Setting the IP Address

3. Netw

or

k 

Scanner

Once your dealer has installed the network scanner option and the machine is 
connected to the network, the network administrator or administrator of the 
machine should use the following procedure to set the IP address of the 
machine.

Note: Although “DHCP” is available as a setting for the IP address (this 
means that the machine automatically obtains an address from a DHCP 
server), it is recommended that a permanent IP address be assigned to the 
machine. If DHCP must be used, it is recommended that the DHCP lease time 
for the IP address be set to unlimited. To check the IP address currently 
assigned to the machine when DHCP is used, print out the network setting list 
as explained on page 78.

•

Make sure that NETWORK CONFIG 
SET is selected.

•

Make sure that IP ADDRESS SETTING 
is selected.

Display:

MENU MODE

5:PROGRAM/GROUP MODE
6:SERIAL POLLING MODE 
7:MEMORY POLL MODE
8:NETWORK SETTING

IP ADDRESS SETTING
 ENABLE DHCP

1:YES
2:NO

NETWORK CONFIG SET

1:IP ADDRESS SETTING
2:INITIALIZE THE NIC

NETWORK SETTING

1:NETWORK CONFIG SET
2:SCAN TO E-MAIL SET-UP
3:NETWORK SETTING LIST