Xerox 450c Manuale Utente
75
2. Do one of the following:
• Using the numeric keypad, enter the fax number.
• To change the fax number, press the
• To change the fax number, press the
LEFT
ARROW
key to move the cursor to the left, press
the
RIGHT ARROW
key to move the cursor to the
right, and press the
EXIT/CLEAR
key to delete a
highlighted number.
• Press
SPEED DIAL
and enter the speed dial
number.
Note Depending on your phone system, you may
need to enter a prefix (for example, 8 or 9) and press
the PAUSE key to add a timed interval before entering
the fax number.
need to enter a prefix (for example, 8 or 9) and press
the PAUSE key to add a timed interval before entering
the fax number.
3. Press
START
.
The WorkCentre dials the fax number, sends the fax, and
sounds a confirmation beep when the transmission is
complete. By default, the WorkCentre prints a report if the
fax could not be sent.
To cancel the transmission before the WorkCentre sends
the fax, press the
sounds a confirmation beep when the transmission is
complete. By default, the WorkCentre prints a report if the
fax could not be sent.
To cancel the transmission before the WorkCentre sends
the fax, press the
STOP
key and then the
ENTER
key.