Toshiba Studio 452 Manuale Utente
309
10
5. “Examine stapler in the Saddle Stitch Unit”
This message appears when the staples in the Saddle Stitch Unit (optional) of the Saddle Stitch Finisher
(optional: MJ-1024) are jammed. To remove them, follow the procedure below.
(optional: MJ-1024) are jammed. To remove them, follow the procedure below.
1
Open the front cover of the finisher.
2
Slide the Saddle Stitch Unit carefully
toward the front.
toward the front.
3
Pull the handle of the stapler of the Sad-
dle Stitch Unit toward you to unlock it.
Then turn the stapler clockwise for about
60 degrees.
dle Stitch Unit toward you to unlock it.
Then turn the stapler clockwise for about
60 degrees.
• The stapler will be locked and will not be turned any further
when it becomes almost horizontal.
1
2