Motorola MC9090-G Manuale Utente
2 - 4
MC9090-G RFID Integrator Guide Supplement
Figure 2-2
Installing the Keypad
4.
Perform a cold boot (see
Multi Media Card (MMC) / Secure Device (SD) Card
The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see
).
To insert the MMC/SD card:
1.
Press the Power button to suspend the mobile computer.
2.
3.
Lift the MMC/SD retaining door.
4.
Position the MMC/SD card, with the contacts down, into the MMC/SD holder. The MMC/SD card corner notch
fits into the holder only one way.
fits into the holder only one way.
5.
Snap the retaining door closed.
NOTE
SD cards are inter-operable with MMC cards and can also be used in MC9090-G RFID mobile
computers.
computers.
CAUTION
Do not remove the keypad while the mobile computer is on and do not operate the mobile computer
with the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper
ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
with the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper
ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.