Canon MX850 Manuale Utente

Setting Up the Machine and the Computer (Macintosh)

On the Canon IJ Network Tool screen, 
select LAN connection, then click OK.

If the Canon IJ Network Tool does not start up 
automatically, select Library > Printers > Canon > 
BJPrinter > Utilities > Canon IJ Network Tool.

If the screen shown on the right appears, make 
sure of the following, then click OK.
– The machine is turned on.
– The machine is connected to the computer with a 

USB cable.

– The MP Drivers have been installed.

Select Setup in the pop-up menu, select your 
machine’s name in Printers, then click OK. 

When the machine has not been connected to the network, to set up the machine to be used from a LAN-

connected computer, the necessary software must be installed on the computer. See “1 Preparing for 

Setup” on page 17 and “2 Installing the Software” on page 18 to confirm that the software installation is 

complete, then proceed with the procedure below.

If you select USB connection, the Canon IJ Network 

Tool will exit without setting up the machine to be used 

over wired LAN.

z

If no printer is detected, click OK. Make sure of the 

following, then click Update.

– The machine is connected to the computer with a 

USB cable.

– The machine is turned on.

z

If the machine’s network settings are already 

configured, the Setup Environment Confirmation 

dialog box appears asking for your confirmation to 

use the machine with the current settings. You can 

proceed with the setup using the current network 

settings. To do so, click Use as is. To reconfigure 

the network settings, click Reconfigure.