Lanier LD245 Manuale Utente

Copying

18

-How to operate

❖ To stop the machine during a multi-

Press the {Clear/Stop} key.

❖ To return the machine to the initial

Press the {Clear Modes} key.

❖ When clearing entered values.

Press the {Clear/Stop} key or [Clear]
on the display.

❖ To check the settings. 

Press the {Check Modes} key.

Use this function if you want to inter-
rupt a long copy job to make urgently
needed copies.

❒ You cannot use the Interrupt Copy

function when fax originals are be-
ing scanned or the scanner func-
tion is being used.

A

Press the {Interrupt} key. 
The Interrupt indicator goes on.

When the originals stop scanning

A Remove the originals that were

B Press the {Start} key.

The machine starts making the
copies.

C When copying is complete, re-

D Press the {Interrupt} key again.

The Interrupt indicator goes off.

E When the display prompts you,

F Press the {Start} key.

❒ The interrupt copy job set-

tings will be restored and the
machine will continue copy-
ing from where it left off.

When the machine keeps 
copying

A Place the originals you want to

B Press the {Start} key.

The machine stops the previous
original job and starts copying
the original.

C When copying is complete, re-

D Press the {Interrupt} key again.

The Interrupt indicator goes off.
The interrupt copy job settings
will  be  restored  and  the  ma-
chine will continue copying
from where it left off.

The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.

❒ See p.94 “Tone: Original remains”.