Lanier 5618 Manuale Utente

User Tools Settings

5 - 3

1. Function Priority 

You can specify the mode (Copier, Fax, Printer) to be 

displayed immediately after the operation switch is turned 

on or System Reset mode is turned on. 

Default: Copier

2. Copy Count Display

The copy counter can be set to show the number of copies 

made (count up) or the number of copies remaining to be 

made (count down).

Default: Up (count up)

3. System Reset 

The machine returns to its prioritized mode automatically 

after your job is finished, after the selected time. This 

function is called “System Reset”. The time can be set 

from 10 to 999 seconds, or no system reset.

You can specify the prioritized mode with the user tools.

 Default: On (60 seconds)

4. Energy Saver Timer 

The machine enters Low Power mode automatically after 

your job is finished, after the selected time. The time can 

be set from 1 to 240 minutes.

In Low Power mode, power consumption is reduced by 

30% compared with Standby mode. This value applies to 

copier features only.

Default:15 minutes

5. Energy Saver Level 

You can select the Energy Saver level. 

Level 1

Power consumption is reduced by about 30% 

compared standby mode.

Warm-up time is about 10 seconds.

Level 2

Power consumption is reduced by about 60% 

compared standby mode.

Warm-up time is about 15 seconds.

Level 3

Power consumption is reduced by about 70% 

compared standby mode.

Warm-up time is about 20 seconds.

These values apply to copier features only.

Default: Level 1