Lanier LD235 Manuale Utente

Accessing User Tools (Copier/Document Server Features)

103

❖ Switch to Batch (SADF)

You can select to have Batch mode
or SADF mode displayed when
you press the [Special Original] key.
See p.14 “Batch mode”. 

❒ Default: Batch

❖ SADF Auto Reset 

In SADF mode, an original must be
set within a specified time after the
previous original has been fed.
You can adjust this time from 3 to
99 seconds in increments of 1 sec-
ond .

❒ Default: 5 seconds

❖ Rotate Sort: Auto Paper Continue

You can specify to continue copy-
ing when paper of the required ori-
entation has run out during rotate-
sorting. See p.33 “Rotate Sort”. 

❒ If you select [No] : 

• When paper of the required

orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. After you have loaded
paper, the machine will con-
tinue copying.

❒ If you select [Yes] : 

• Copying continues using copy

paper of a different orienta-
tion. The copy job will finish
even if you have left the ma-
chine.

❒ Default: No

❖ Auto Sort 

You can specify whether Sort
mode is selected when the ma-
chine is turned on or the mode is
cleared.

❒ Default: No

❖ Memory Full Auto Scan Restart

When memory becomes full while
scanning originals, the machine
can make copies of scanned origi-
nals first, and then automatically
proceed scanning remaining origi-
nals.
You can enable or disable this
function.

❒ If you select [No] :

• When memory becomes full,

the machine stops operation
allowing you to remove the
copy pages delivered on the
output tray.

❒ If you select [Yes] :

• You can leave the machine

unattended to make copies,
but sorted pages will not be
sequential.

❒ Default: No

❖ Select Stack Function 

Specify whether Stack or Rotate
Sort has priority to be shown on
the initial display.

❒ Default: Stack
❒ An optional finisher is required

to use this function.