Lanier LD235 Manuale Utente
Copying
32
2
D Enter the desired ratio with the
number keys, followed by [#].
E Press [OK].
To specify a ratio with [n] and
[o]
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
B Press [Horizontal].
C Adjust the ratio using [n] or
[o]
.
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n]
Pressing and holding down
[n]
or [o] changes it in in-
crements of 10%.
❒ If you have incorrectly en-
tered the ratio, readjust the
ratio with [n] or [o].
ratio with [n] or [o].
D Press [Vertical].
E Adjust the ratio with [n] or
E Adjust the ratio with [n] or
[o]
.
F Press [OK].
D
Press [OK].
E
Place your originals, and then
press the {Start} key.
press the {Start} key.
Directional Size Magnification
(mm)
(mm)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Note
❒ Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown.
the copy, as shown.
❒ You can enter sizes within the fol-
lowing ranges:
Metric
version
version
Vertical: 1–999 mm
(in increments of 1 mm)
(in increments of 1 mm)
Horizontal: 1–999 mm
(in increments of 1 mm)
(in increments of 1 mm)
Inch
version
version
0.1"–99.9"
(in increments of 0.1")
(in increments of 0.1")
CP2M01EE