Pandigital V2.6 Manuale Utente
38
4. Select your desired time format:
12HR
= 12:00am-12:00pm (default)
24HR
= 12:00-24:00
5. Tap in the
Language
field to select desired language. **Only English available
at this time. Multiple languages will be available with future firmware
upgrades.**
upgrades.**
6. Tap
to adjust the screen brightness. When
Auto Brightness
is
selected, your device senses the light exposure and automatically adjusts the
screen’s brightness accordingly (i.e., in dark environments the screen
automatically brightens).
screen’s brightness accordingly (i.e., in dark environments the screen
automatically brightens).
7. Tap
next to
Keyboard and System Sounds
if you want to turn the keypad
click and system sounds
OFF
(i.e., end of row ding, warning ding, etc.).
Settings>Calibrate Touch Screen
If you notice that the touch screen is not responding accurately, you may need to
re-calibrate the touch screen sensors.
re-calibrate the touch screen sensors.
1. Select
Settings
from the Application Quick Launch Bar,
tap
Calibrate
.
2. Tap
Calibrate
to perform the calibration.
3. When the pop-up windows appear, tap the “
+
” in the designated spots on the
screens.
4. If calibration is successful, you can resume normal use. If unsuccessful,
repeat the calibration again.
Settings>Network
In order to connect to the Internet, you must have a Wi-Fi network set up on your
p a n d i g i t a l
n o v e l
.
1. Select
Settings
from the Application Quick Launch Bar,
tap
Network
.
2. If your Wi-Fi network is not listed, tap
Scan
.
3. The device scans and lists all local Wi-Fi Networks found. A
indicates
secure networks that require login name/password to connect.
4. Tap the desired network to which you want to connect,
enter the
Network
Password
if applicable.
5. Tap
to close the
Settings
screen.
If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap
Other
and then enter the network name and key,
tap
Save
.
(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting
settings by selecting
Manual Setup
, and then follow the prompts.