HP (Hewlett-Packard) 4100TN Manuale Utente
198 Appendix A - Specifications
EN
Envelope margins
The following table gives typical address margins for a Commercial
#10 or DL envelope.
#10 or DL envelope.
Note
For the best print quality, position margins no closer than 15 mm
(0.6 in) from the edges of the envelope.
(0.6 in) from the edges of the envelope.
Envelope storage
Proper storage of envelopes helps contribute to good print quality.
Envelopes should be stored flat. If air is trapped in an envelope,
creating an air bubble, then the envelope may wrinkle during printing.
Envelopes should be stored flat. If air is trapped in an envelope,
creating an air bubble, then the envelope may wrinkle during printing.
Card stock and heavy paper
Many types of card stock can be printed from tray 1, including index
cards and postcards. Some card stock performs better than others
because its construction is better suited for feeding through a laser
printer.
cards and postcards. Some card stock performs better than others
because its construction is better suited for feeding through a laser
printer.
For optimum printer performance, do not use paper heavier than
199 g/m
199 g/m
2
(53 lb) in tray 1 or 105 g/m
2
(28 lb) in other trays. Paper that
is too heavy might cause misfeeds, stacking problems, paper jams,
poor toner fusing, poor print quality, or excessive mechanical wear.
poor toner fusing, poor print quality, or excessive mechanical wear.
Note
Printing on heavier paper may be possible if the tray is not filled to
capacity, and short grain paper with a smoothness rating of 100 to 180
Sheffield is used.
capacity, and short grain paper with a smoothness rating of 100 to 180
Sheffield is used.
Type of address
Top margin
Left margin
Return address
15 mm (0.6 in)
15 mm (0.6 in)
Delivery address
51 mm (2 in)
89 mm (3.5 in)