Elo TouchSystems 1767L Manuale Utente

2-5

Depending on your mounting scheme, use the L-brackets or the VESA 75/100mm standard holes locat-

ed on the back of the kiosk monitor or the 5.5 diameter holes (only on rear mount). See page 15 for

VESA mounting information.

You will need a screwdriver to attach the L-brackets.

Your kiosk touchmonitor comes with a mounting bracket (C-bracket) attached at the back. Included are

two L-brackets (and four screws) that attach to both ends of the C-bracket for additional mounting

options.

To attach the L-brackets:

1

Lay the monitor face down.

2

Place the long end of the L-bracket against the end of the mounting C-bracket. Line up the

two holes of the L-bracket with the two holes of the C-bracket. See the illustration below.

3

Place two screws in the holes and with the screwdriver, screw them in to secure the bracket.

4

Repeat steps 2 and 3 to attach the other L-bracket to the other side of the mounting bracket.

C bracket

L bracket