JVC LM-15G Manuale Utente

 

11 

SIGNAL LEVEL:    You can choose the signal level from ”STD.” or “AMP.”. 

STD.:  Select this for normal operation. 

AMP.:    Select this to watch dark part of the picture better. 

DISPLAY:    If you select ‘

DISPLAY

’ and press the ‘

MENU/ENTER

’ button, you can confirm the current status; 

resolution, Horizontal frequency and Vertical frequency. 

COLOR SYSTEM:   You can choose the color system from NTSC, PAL, BW60 or BW50. Choose the correct color 

system when the color is abnormal or no color appears. 

AGC:  You can turn the AGC (Auto Gain Control) function on (ON) or off (OFF).If you select off(OFF), you can adjust 

contrast bar. 

REMOTE:  If you select ON, you can only do remote control. If you select OFF, you can control only by using the 

monitor’s buttons. 

Exit:   

If you select “Exit” and press the ‘

MENU/ENTER

’ button, the menu will disappear. 

All reset:    If you select “All reset” and press the ‘

MENU/ENTER

’ button, the settings will be return to the factory 

settings. 

                    * “COLOR SYSTEM” and the input select will not be return to the factory settings. 

 
OSD POSITION:   

You can adjust the position of the menu on the screen as following procedure.   

1. 

Select “OSD POSITION” and press the ‘

MENU/ENTER

’ button, the sub-menu will appear. 

 

 

 

 

2. Press 

‘UP’ and ‘DOWN’ button to choose “H. POSITION” (horizontal position) or “V. POSITION” (vertical 

position), and then press ‘

’ button to display the adjusting menu 

3. Press 

‘UP’ and ‘DOWN’ button to adjust the position of the menu on the screen. 

4. Press 

’ button to return to the “OSD POSITION” menu. 

Next page: If you select ‘

Next page

’ and press the ‘

MENU/ENTER

’ button, the next menu will appear. 

 

You can adjust the contrast of the image from the PC. 

 

 

 

－

 

＋