JVC LM-15G Manuale Utente

External control switch

External control
functions Open

circuit

(open)

Closed circuit

(short)

INPUT INPUT

INPUT

REMOTE

(Remote cable)

External control switch

open circuit (open)

RCA pin

closed circuit (short)

REMOTE

(Remote cable)

External control switch

RCA pin

open circuit (open)

closed circuit (short)

Basic Connection Example

Notes:

・

Before connecting your system, make sure that all devices are turned off.

・

The illustration shows some examples of different connections. Terminal connections may differ depending on

the devices. Be sure to refer to the manuals provided with the devices.

・

Each pair of input (IN) and output (OUT) terminals are bridge-connected

・

If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other

cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto

terminate function).

・

When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate

video components.(For example, if both terminals are connected to the same VCR, resonance may occur except

during playback. This is caused by the same video signal “looping” between the VCRs, and is not a malfunction.)

・

The ASPECT or INPUT A/B settings can be controlled via the ASPECT or INPUT jack in the REMOTE terminal.

・

When using REMOTE terminal, set REMOTE function ON . See “SYSTEM SETTING menu “ on page 11.

Video Camera

Video Monitor

VCR

Video Monitor

VCR

Video Monitor

VCR

Video Camera

External control switch

External control
functions

Open circuit

(open)

Closed circuit

(short)

ASPECT

RATIO

4 – 3 (4：3) 16 – 9 (16：9)

Signal Flow