iiyama E2208HDD Manuale Utente

19     OPERATING THE MONITOR / TROUBLE SHOOTING

Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you 
have. If the monitor does not get a picture, skip to 2.

2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE 

MONITOR or if the problem persists.

If you are experiencing a problem which is not described below or you cannot correct the 
problem, discontinue using the monitor and contact your dealer or iiyama service center for further 
assistance.

3.



 The AC socket is live. Please check with another piece of equipment.

 If the blank screen saver is in active mode, touch the keyboard or the 

mouse.

 Increase the Contrast and/or Brightness.

The computer is ON.

 The Signal Cable is properly connected.



The Power Switch is turned ON.

 The signal timing of the computer is within the specifi cation of the monitor.

(Power indicator 
is orange.)

 If the monitor is in power management mode, touch the keyboard or the 

mouse.

The screen is not 
synchronized.

 The Signal Cable is properly connected.
 The signal timing of the computer is within the specifi cation of the monitor.

 The signal timing of the computer is within the specifi cation of the monitor.

 The video output level of the computer is within the specification of the 

monitor.

The computer is ON.
The Signal Cable is properly connected. 




1.

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

(Power indicator 
is blue.)

The picture does 
not appear.

(Power indicator 
does not light up.)

The Power Cable is fi rmly seated in the socket.

  

The screen 
position is not in 
the center.

 The signal timing of the computer is within the specifi cation of the monitor.

The screen is too 
bright or too dark.

The video output level of the computer is within the specification of the 
monitor.

