Sharp PN-655U Manuale Utente

34

E

■ Switching the screen size (When the input mode is DIGITAL/ANALOG)

Even when the screen size is changed, the display may remain the same depending on the input signal.

■ Switching the screen size (When the input mode is COMPONENT/VIDEO)

The desired screen size can be selected to suit the input signal.
Even when the screen size is changed, the display may remain the same depending on the input signal.

Displays image so it fills the 
screen vertically, while 
maintaining the original 
aspect ratio.

Displays image so it fills the 
entire screen.

Use this size if ZOOM 1 
cuts off the subtitles.

Displays the image of the aspect 
ratio of 4:3 so it fills the entire 
screen with the same aspect 
ratio. The upper and lower portion 
of the image may be cut off.

Displays the dots of the 
signals input from the 
connected PC as the 
corresponding dots on the 
screen. (See page 56.)

Displays the entire image of 
the aspect ratio of 4:3 
without changing the 
aspect ratio.

Displays the image of the 
aspect ratio of 4:3 so it fills 
the entire screen by 
stretching the image.

Use this size if ZOOM 1 
cuts off the subtitles.

Displays the image of the aspect 
ratio of 4:3 so it fills the entire 
screen with the same aspect 
ratio. The upper and lower portion 
of the image may be cut off.

Displays the dots of the 
input signals as the 
corresponding dots on the 
screen.*

* If “DotbyDot” is selected when the VIDEO or COMPONENT (480i or 480p) image

is displayed, the image quality cannot be changed by adjusting the value of
“SHARPNESS” from the VIDEO ADJUSTMENT menu.