Roland VP-770 Manuale Utente
108
Restoring Data That was Transmitted to an External MIDI Sequencer
Use a MIDI cable (sold separately) to connect your external MIDI
sequencer’s MIDI OUT connector to the VP-770’s MIDI IN connector
(p. 116).
sequencer’s MIDI OUT connector to the VP-770’s MIDI IN connector
(p. 116).
Switch OFF the “SysEx Protect” setting (p. 97).
Have your external MIDI sequencer transmit the recorded bulk dump
data to the VP-770.
data to the VP-770.
The registrations stored in the VP-770 will be rewritten.
Turn the “SysEx Protect” setting (p. 97) back ON again.
If you are restoring only the Temporary Regist, there’s no need to switch off the “SysEx Protect” setting
(p. 97).
(p. 97).
Checking the VP-770’s Version
( UTILITY– VERSION INFO)
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Utility,” then press
the [F2] (ENTER) button.
the [F2] (ENTER) button.
The UTILITY screen will appear.
Use the cursor buttons or the value dial to select “Version Info,” then
press the [F2] (ENTER) button.
press the [F2] (ENTER) button.
Here’s how to check the VP-770’s software version.
1.
2.
3.
3.
4.
*
1.
2.
2.
3.